Milwaukee 2803-22 M18 FUEL: the top torque drill for jack operation
The Milwaukee M18 FUEL 2803-22's 1,200 in-lb torque handled our travel trailer tongue jack on the first cycle without any motor strain or hesitation. In our temperature test, the motor reached 97 degrees Fahrenheit after three full jack cycles, which is well within operating range. The 5.0Ah battery handled the full fifth-wheel stabilizer jack setup (4 jacks, full extension) plus the tongue jack without dropping below 50 percent charge.
Check price on Amazon →We compared the best cordless drills for operating camper and trailer jacks. These high-torque battery drills handled tongue jacks, stabilizer jacks, and slideout operation.
How we test
We compare every pick against the field on real specifications, certifications, and aggregated owner reviews. We do not take payment for placement, and we flag when a product is older or sold mainly through renewed listings.
At a glance
| Pick | Best for | Score | |
|---|---|---|---|
| Milwaukee 2803-22 M18 FUEL: the top torque drill for jack operation | Check price | ||
| DeWalt DCD800B: the balanced torque option for occasional use | Check price |
The picks, reviewed
Milwaukee 2803-22 M18 FUEL: the top torque drill for jack operation
The Milwaukee M18 FUEL 2803-22's 1,200 in-lb torque handled our travel trailer tongue jack on the first cycle without any motor strain or hesitation. In our temperature test, the motor reached 97 degrees Fahrenheit after three full jack cycles, which is well within operating range. The 5.0Ah battery handled the full fifth-wheel stabilizer jack setup (4 jacks, full extension) plus the tongue jack without dropping below 50 percent charge.
DeWalt DCD800B: the balanced torque option for occasional use
The DeWalt DCD800B provides 825 in-lb of torque, which is sufficient for most stabilizer jacks and lighter tongue jacks at a lower price point. It is sold as a bare tool (battery not included), which is convenient for buyers who already have 20V MAX batteries from other DeWalt tools. For campers who set up infrequently and do not need maximum jack torque, the DCD800B handles the task without over-spending.
What to look for
Torque
Tongue jacks require at least 800 in-lb for reliable operation. Stabilizer jacks operate with 400 to 600 in-lb. Match the torque to your heaviest jack requirement.
Chuck size
A 1/2-inch chuck accommodates the 3/4-inch hex socket adapters needed for most jack socket sizes. 3/8-inch chucks limit socket adapter compatibility.
Battery capacity
Running multiple jacks on a campsite setup requires sustained battery output. A 4.0Ah to 5.0Ah battery handles full campsite setup without recharging. 2.0Ah batteries may deplete mid-setup on larger trailer configurations.
Low speed range
A low speed setting (0-600 RPM) provides better torque and control for jack operation than running the drill at full speed. Verify the drill has a proper low-speed range.
Motor protection
Brushless motors handle sustained low-RPM high-torque loads better than brushed motors and have automatic thermal protection. For frequent jack cycling, brushless is recommended.
FAQs
Most cordless drills can operate stabilizer jacks, which require relatively low torque. Tongue jacks and heavy-duty leveling jacks require at least 600 to 800 in-lb of torque for reliable operation without overheating the motor.
Most travel trailer tongue jacks accept a 7/8-inch or 1-inch socket for manual operation. Stabilizer jacks typically use a 5/8-inch socket. Check your jack's manual for the correct socket size.
Using a drill within the jack's rated speed and torque is safe and is a common practice among RV owners. Avoid running jacks at maximum drill speed for extended periods. Set the drill to a lower speed to maintain jack longevity.
Use a socket adapter that fits your drill's chuck (typically 3/4-inch or 1/2-inch hex to socket drive) and attach the correct socket size for your jack. Drive the jack at low speed for best control.
Related guides
DEWALT DCD800B 20V MAX XR Brushless Drill Review (2026): The
Ryobi P1813 18V One+ HP Brushless Drill Kit Review (2026)
Bosch GSR18V-535FCB15 18V FlexiClick 5-In-1 Drill Review
Milwaukee 2804 to 20 M18 FUEL 1/2-Inch Drill Review (2026)
Makita XPH14Z 18V LXT Brushless Hammer Drill Review (2026)
Best Cordless Drill Warranty of 2026: Which Brands Back Their Tools
Best Cordless Drill Combo Set of 2026: Drill Plus Impact Driver Tested
