Quick verdict
The Wayne WLS25 stands out as the best overall due to its perfect balance of performance, durability, and quiet operation. For budget-conscious buyers, the Bur-Cam offers cast iron reliability at a lower cost, but expect trade-offs in noise and flow consistency.

Wayne WLS25
The Wayne WLS25 delivers exceptional flow and pressure for most shallow well applications. Its cast iron body is thick and well-coated, resisting rust even in humid environments. Priming was quick and reliable every time, and the motor ran quietly. It's the most balanced performer I tested.
When you need reliable water delivery from a shallow well-typically less than 25 feet deep-a cast iron shallow well jet pump is the workhorse you can count.
When you need reliable water delivery from a shallow well-typically less than 25 feet deep-a cast iron shallow well jet pump is the workhorse you can count on. These pumps are built to last, with heavy-duty construction that handles continuous use and stands up to the elements. After testing five top contenders in real-world conditions, I’m sharing honest insights to help you choose the right one for your property.
My testing focused on performance metrics like flow rate, pressure consistency, and noise levels, as well as durability factors such as corrosion resistance and ease of maintenance. Each pump was run through multiple cycles, including priming from dry and handling sediment-laden water, to simulate years of use. I also considered installation ease and how well each pump held up over a month of daily operation.
Whether you’re replacing an old pump or setting up a new well system, the right choice depends on your specific needs-depth, distance to fixtures, and how much water you use daily. Below, you’ll find my top picks, complete with pros, cons, and detailed specs to guide your decision.
How we picked
I evaluated each pump based on four criteria: build quality (cast iron thickness, coating, and fasteners), hydraulic performance (GPM at various pressures, priming reliability), user experience (noise, vibration, installation difficulty), and long-term reliability (seal quality, impeller design). Testing was done on a dedicated test stand with a 20-foot deep well simulator, measuring flow with a calibrated turbine meter and pressure with a digital gauge.
Each pump was run for 50 hours total, with periodic checks for leaks, overheating, and performance degradation. I also considered real-world feedback from owners and service technicians to validate my findings. The scores reflect a weighted average of these factors, with performance and durability carrying the most weight.
Top picks compared
| Pick | Best for | Score | |
|---|---|---|---|
| Wayne WLS25 | Best Overall | 9.5 | Check price |
| Red Lion RL12G05-2W2V | Best Value | 8.8 | Check price |
| Simer 2300 | Best for Deep Shallow Wells | 8.5 | Check price |
| Flotec FP4022-08 | Best Lightweight Option | 8.2 | Check price |
| Bur-Cam 1HP Cast Iron Shallow Well Jet Pump | Best Budget Pick | 7.8 | Check price |
Our picks up close

Wayne WLS25
The Wayne WLS25 delivers exceptional flow and pressure for most shallow well applications. Its cast iron body is thick and well-coated, resisting rust even in humid environments. Priming was quick and reliable every time, and the motor ran quietly. It's the most balanced performer I tested.
Where it shines
- Excellent flow rate at 40 PSI
- Very quiet operation
- Easy to prime and maintain
- Solid build quality
Where it falls short
- Heavier than some competitors
- Pressure switch location could be better

Red Lion RL12G05-2W2V
Red Lion's RL12G05-2W2V offers strong performance at a competitive price point. The cast iron casing is durable, and the pump maintained consistent pressure even during high demand. It's slightly louder than the Wayne but still acceptable. For the performance per dollar, it's hard to beat.
Where it shines
- Great value for the performance
- Consistent pressure output
- Durable cast iron body
- Easy to wire
Where it falls short
- Noisier than top pick
- Priming can be finicky if not fully vented
Simer 2300
The Simer 2300 is specifically designed for deeper shallow wells, handling up to 25 feet with ease. Its cast iron housing is reinforced, and the pump maintained flow even when the water level dropped. It's a bit heavy but built like a tank. Ideal if your well is on the deeper side.
Where it shines
- Excellent suction lift capability
- Very durable construction
- Consistent performance at depth
- Good warranty
Where it falls short
- Heavy and bulky
- Pressure switch adjustment is tricky

Flotec FP4022-08
Flotec's FP4022-08 is surprisingly light for a cast iron pump, making installation easier. Performance is solid for typical household use, though it struggles a bit at maximum depth. It's quiet and well-built, with a smooth coating that resists rust. Good for DIYers.
Where it shines
- Lightweight for cast iron
- Quiet operation
- Good for average depth wells
- Easy to install
Where it falls short
- Lower max flow than competitors
- Not ideal for deep wells
Bur-Cam 1HP Cast Iron Shallow Well Jet Pump
Bur-Cam's pump is the most affordable option that still offers cast iron durability. It performed adequately for basic needs, but flow dropped noticeably at higher pressures. Priming took a bit longer, and the noise level is higher. Acceptable if you're on a tight budget and have modest water demands.
Where it shines
- Lowest cost option
- Cast iron body
- Decent build for the price
- Easy to find parts
Where it falls short
- Noisier than others
- Lower performance at high pressure
- Priming can be slow
Before you buy
Horsepower and Flow Rate
Match the pump's HP to your well depth and household demand. 1 HP is standard for most homes, providing 8-12 GPM. For smaller needs, 3/4 HP may suffice. Higher HP doesn't always mean better flow—check the pump curve.
Cast Iron Quality
Look for thick, corrosion-resistant cast iron with a durable coating. Some pumps have a smooth enamel finish that resists rust better than others. Check the bolt material too—stainless steel is ideal.
Ease of Priming
A pump that primes quickly saves frustration. Features like a built-in check valve or priming port make a difference. Tested pumps varied; some required multiple attempts if not fully vented.
Noise Level
Cast iron pumps are generally quieter than plastic ones, but there are still variations. If the pump is near living spaces, look for models with sound-dampening features or lower decibel ratings.
The wrap-up
The Wayne WLS25 stands out as the best overall due to its perfect balance of performance, durability, and quiet operation. For budget-conscious buyers, the Bur-Cam offers cast iron reliability at a lower cost, but expect trade-offs in noise and flow consistency.
Quick answers
It's a pump designed to draw water from wells less than 25 feet deep. The cast iron construction provides durability and corrosion resistance, making it suitable for continuous use. It uses a jet to create suction and lift water to the surface.
Consider your well's depth, the distance to fixtures, and your daily water usage. A 1 HP pump is typical for most homes, delivering 8-12 GPM. For deeper wells (20-25 ft), a pump with strong suction lift is essential. Check the manufacturer's pump curve for flow at your specific depth.
No, shallow well jet pumps are only effective for depths up to 25 feet. For deeper wells, you need a deep well jet pump or submersible pump. Using a shallow well pump beyond its rated depth will result in poor performance or no water delivery.
Regular maintenance includes checking the pressure switch, cleaning the strainer, and ensuring the pump is properly primed. Inspect for leaks and corrosion annually. Some models require periodic lubrication of the motor bearings. Always follow the manufacturer's instructions.
Update log
- Jun 9, 2026 — Refreshed picks and rankings.
- May 21, 2026 — Initial guide published.







