Foundation Armor AR350 -- Best Glossy Wet-Look Sealer
The Foundation Armor AR350 is a solvent-based acrylic sealer that delivers a rich, high-gloss wet-look finish on concrete pavers, brick, and natural stone. It enhances color depth while forming a hard protective film against water, oil, and de-icing salts. Coverage runs roughly 200 to 400 square feet per gallon depending on porosity. Application is straightforward with a roller or pump sprayer, and it dries to a touch-ready surface in about one hour. It performs especially well in freeze-thaw climates where moisture intrusion is a concern. The solvent base requires ventilation during application.
Check price on Amazon →Protect your driveway and patio pavers with the right sealer. These five picks offer lasting water resistance, UV protection, and easy application for DIYers and pros.
Concrete pavers add curb appeal and durability to driveways, patios, and walkways, but unsealed pavers absorb water, stain easily, and fade over time. A good paver sealer locks out moisture, resists oil and UV damage, and keeps the surface looking fresh for years. Whether you want a wet-look gloss or a natural matte finish, this guide covers the top options available in 2026.
| Product | Best For | Rating |
| — | — | — |
| Foundation Armor AR350 | Glossy wet look | 4.8/5 |
| Techniseal WB+ | Matte natural finish | 4.7/5 |
| RadonSeal DryWay | Deep penetrating protection | 4.6/5 |
| Black Diamond Stoneworks | Budget DIY projects | 4.4/5 |
| Ghostshield Lithi-Tek 9500 | High-traffic commercial use | 4.7/5 |
How we evaluated these
We compare every pick against the field on real specifications, certifications, and aggregated owner reviews. We do not take payment for placement, and we flag when a product is older or sold mainly through renewed listings.
The shortlist
| Pick | Best for | Score | |
|---|---|---|---|
| Foundation Armor AR350 -- Best Glossy Wet-Look Sealer | Check price | ||
| Techniseal WB+ -- Best Matte Natural Finish | Check price | ||
| RadonSeal DryWay -- Best Deep Penetrating Protection | Check price | ||
| Black Diamond Stoneworks -- Best Budget Pick | Check price | ||
| Ghostshield Lithi-Tek 9500 -- Best for High-Traffic Areas | Check price |
Each pick, examined
Foundation Armor AR350 -- Best Glossy Wet-Look Sealer
The Foundation Armor AR350 is a solvent-based acrylic sealer that delivers a rich, high-gloss wet-look finish on concrete pavers, brick, and natural stone. It enhances color depth while forming a hard protective film against water, oil, and de-icing salts. Coverage runs roughly 200 to 400 square feet per gallon depending on porosity. Application is straightforward with a roller or pump sprayer, and it dries to a touch-ready surface in about one hour. It performs especially well in freeze-thaw climates where moisture intrusion is a concern. The solvent base requires ventilation during application.
Techniseal WB+ -- Best Matte Natural Finish
Techniseal WB+ is a water-based acrylic sealer that preserves the natural appearance of pavers without adding gloss. It is an excellent choice for tumbled or textured pavers where a shiny finish would look out of place. The formula resists efflorescence, repels water, and stabilizes joint sand to discourage weed growth and ant infiltration. Because it is water-based, cleanup is easy and VOC levels are low, making it safer for enclosed or poorly ventilated areas. It penetrates moderately and forms a light surface film. Reapplication every three to four years maintains optimal protection.
RadonSeal DryWay -- Best Deep Penetrating Protection
RadonSeal DryWay is a silane-siloxane water repellent that soaks into the concrete rather than forming a surface film. This penetrating chemistry does not change the appearance of the paver, making it ideal for natural-look installations. It creates an invisible hydrophobic barrier that repels water and chloride intrusion from road salts without trapping moisture inside the slab. Because there is no surface film, it will not peel, flake, or yellow over time. Coverage is generous at up to 500 square feet per gallon. It is one of the longer-lasting options, with protection reported to exceed five years in moderate climates.
Black Diamond Stoneworks -- Best Budget Pick
Black Diamond Stoneworks Natural Stone Sealer offers solid entry-level protection at a price point that suits smaller DIY projects. The water-based formula provides light surface protection against staining and moisture on pavers, flagstone, and brick. It dries clear with a low-sheen finish and can be applied with a brush, roller, or sprayer. While it does not match the durability of premium penetrating sealers, it is well suited for covered patios or low-traffic walkways where extreme weather exposure is not a factor. Reapplication every one to two years keeps coverage fresh and effective.
Ghostshield Lithi-Tek 9500 -- Best for High-Traffic Areas
Ghostshield Lithi-Tek 9500 is a lithium silicate densifier and sealer designed for high-traffic commercial and residential surfaces. It chemically reacts with the concrete to increase surface density and hardness, making it highly resistant to abrasion, deicing chemicals, and heavy foot or vehicle traffic. The result is an invisible, breathable barrier that will never peel or trap moisture. It is more expensive than acrylic alternatives but delivers superior long-term performance with minimal maintenance. One application typically lasts the lifetime of the concrete under normal conditions. Ideal for driveways, plazas, and commercial paver installations.
Buying considerations
What to consider
Start by deciding on the finish you want: penetrating sealers preserve the natural look and never peel, while acrylic film-formers offer gloss or color enhancement but require periodic reapplication. Consider your climate next. In freeze-thaw regions, a breathable penetrating sealer or a flexible acrylic formula prevents moisture from getting trapped and cracking the surface. For driveways, choose a product rated for vehicle traffic and oil resistance. Water-based sealers are easier to apply and have lower VOC emissions, while solvent-based options tend to penetrate better and dry harder. Always test a small area first to confirm the finish meets your expectations before committing to a full application.
What to consider
Sealing your pavers is just one step in long-term outdoor maintenance. You may also find value in our guide to [best concrete porch paint](/articles/best-concrete-porch-paint) for connected surfaces, or explore [best concrete power washer](/articles/best-concrete-power-washer) options to prep the surface before sealing. For details on how we evaluate these products, see our [/methodology](/methodology) page.
Questions answered
Most concrete paver sealers last two to five years depending on traffic and climate. In high-traffic driveways or areas with harsh freeze-thaw cycles, reseal every two years. In low-traffic patios with mild weather, a quality penetrating sealer can last up to five years before reapplication is needed.
Yes, cleaning is essential for proper adhesion. Remove all dirt, oil, efflorescence, and existing sealer before applying a new coat. Use a concrete degreaser and pressure wash the surface, then allow it to dry completely for at least 24 hours before sealing to avoid trapping moisture beneath the coating.
Keep reading
5 Best Concrete for Mosaic Stepping Stones 2026 | Smooth Base, Strong Bond
5 Best Concrete Power Washer 2026 | Top pressure washers for concrete
5 Best Concrete Mix for Table Tops 2026 | Smooth Durable Surfaces
5 Best Concrete Pressure Washer Attachment 2026 | Top surface cleaner picks
5 Best Concrete Mixes for Making Planters 2026 | Lightweight & Durable Picks
5 Best Concrete Sealers for Patios 2026 | Weather-Proof Your Outdoor Living Space
5 Best Concrete Mix for Stamping 2026 | Sharp Impressions Every Time
