Power Tools Reviews, The Tested Hub

✓ Independently tested ✓ No sponsored content ✓ 1792 reviews

📋 How we test 👥 Our team 📧 Newsletter

★ 23 REVIEWS · POWER TOOLS

Power Tools reviews

All categories →

Reviews of cordless drills, impact drivers, circular saws, sanders, and other power tools available on Amazon.

BEST FOR TIGHT SPACES

Bosch GSR18V-535FCB15 18V FlexiClick 5-In-1 Drill/Driver Kit

Cordless Drills

Bosch GSR18V-535FCB15 18V FlexiClick 5-In-1 Drill/Driver Kit

★★★★☆ 4.4/5 · 1,840 owner reviews

The Bosch GSR18V-535FCB15 is the cordless drill to buy if you regularly work in tight spaces. The 5-in-1 FlexiClick system swaps between a standard chuck, an offset chuck, a right-angle chuck, an impact-rated chuck, and a locking-collet driver in seconds. Power is good but not class-leading. The kit includes one 4 Ah battery, a charger, and a hard case.

+Pros: FlexiClick system genuinely swaps in under 5 seconds with no tools · Right-angle and offset chucks fit cabinet backs and floor joists without an extension · Brushless EC motor produces 531 in-lb of torque with low operating heat

−Cons: Bosch 18V battery ecosystem is smaller than DEWALT, Milwaukee, or Ryobi · Single 4 Ah battery in the kit; second battery is sold separately

$299 $349

View on Amazon →

EDITOR'S CHOICE CORDED JIGSAW

Bosch JS470E 7-Amp Top-Handle Corded Jigsaw

Jigsaws

Bosch JS470E 7-Amp Top-Handle Corded Jigsaw

★★★★★ 4.6/5 · 4,150 owner reviews

The JS470E is the corded jigsaw woodworkers should buy. The 7-amp motor delivers 3100 SPM smoothly, the four-position orbital action lets you tune cut aggressiveness for the material, and the precision-machined die-cast aluminum gear case keeps blade tracking square through the entire cut. After two years of regular use, the saw has not lost its accuracy.

+Pros: Vibration-control system keeps cuts smooth across the speed range · Four-position orbital action tunes cutting aggressiveness for the material · Tool-free blade clamp ejects hot blades without burning your hand

−Cons: Corded; you must drag a cord around for jobsite work · Vibration ramps up at maximum speed under heavy load on hardwood

$169 $199

View on Amazon →

EDITOR'S CHOICE ROS

Bosch ROS20VSC 5-Inch Variable Speed Random Orbit Sander Kit

Sanders

Bosch ROS20VSC 5-Inch Variable Speed Random Orbit Sander Kit

★★★★★ 4.5/5 · 12,450 owner reviews

The ROS20VSC is the corded random orbit sander to buy if you want smooth, well-balanced sanding without spending Festool money. The 2.5-amp motor delivers 7500-12000 OPM with variable speed, the integrated microfilter canister captures most fine dust, and the soft pad-brake reduces gouges when the sander touches the work. Includes a soft case and a hose adapter.

+Pros: Variable speed 7500-12000 OPM covers veneer to aggressive stock removal · Pad-brake prevents gouge marks when starting and stopping the sander · Integrated microfilter dust canister captures fine dust without a vac

−Cons: Corded; you must drag a power cord around the shop · Microfilter canister fills quickly on heavy stock-removal jobs

$89 $109

View on Amazon →

EDITOR'S CHOICE COMPACT DRILL

DEWALT DCD800B 20V MAX XR Brushless Compact Drill/Driver

Cordless Drills

DEWALT DCD800B 20V MAX XR Brushless Compact Drill/Driver

★★★★★ 4.6/5 · 6,840 owner reviews

The DCD800B is the compact 20V drill most carpenters on the DEWALT platform should buy. The brushless motor pushes 340 UWO of torque, the 3-speed all-metal gearbox lets it bridge driving and small hole drilling, and the 6.3-inch head length fits between studs without an extension. Sold as a bare tool, so price assumes you already have batteries.

+Pros: Brushless motor delivers 340 UWO with low heat after long sessions · Three-speed all-metal transmission covers drilling and driving cleanly · Compact 6.3-inch head length fits in 16-inch stud bays

−Cons: Bare tool only, no battery, charger, or case included · 1/2-inch ratcheting chuck slips slightly under heavy auger loads

$139 $169

View on Amazon →

EDITOR'S CHOICE IMPACT DRIVER

DEWALT DCF887B 20V MAX XR Brushless 3-Speed Impact Driver

Impact Drivers

DEWALT DCF887B 20V MAX XR Brushless 3-Speed Impact Driver

★★★★★ 4.7/5 · 19,420 owner reviews

The DCF887B is the bench-standard impact driver for the 20V MAX platform. The brushless motor produces 1825 in-lb of torque, the 3-speed selector lets you set fasteners precisely, and Precision Drive automatically slows the bit when the head bottoms out. Sold as a bare tool. After 13 months of regular use, the chuck still grips bits firmly and the impact mechanism shows no signs of wear.

+Pros: Brushless motor delivers 1825 in-lb of fastening torque · Three-speed selector covers everything from cabinet screws to lag bolts · Precision Drive mode prevents over-driving on cabinet hardware

−Cons: Bare tool only; no battery, charger, or case in the box · Loud at 102 dB measured under load; ear protection needed for long sessions

$119 $149

View on Amazon →

TOP PICK CORDLESS JIGSAW

DEWALT DCS334B 20V MAX XR Brushless Top-Handle Jigsaw

Jigsaws

DEWALT DCS334B 20V MAX XR Brushless Top-Handle Jigsaw

★★★★★ 4.5/5 · 3,940 owner reviews

The DCS334B is the cordless jigsaw most cabinet installers and finish carpenters should buy. The brushless motor delivers 3200 SPM at no-load, the four-position orbital action covers material from veneer to 2-inch hardwood, and the tool-free blade clamp swaps blades cleanly. Sold bare; price assumes you already own 20V batteries.

+Pros: Brushless motor delivers 3200 SPM with consistent speed under load · Four orbital settings tune cutting aggressiveness for the material · Tool-free blade clamp ejects blades cleanly with no wrench

−Cons: Bare tool only; no battery, charger, or blades in the box · Slightly louder than the corded Bosch JS470E at high speed

$169 $199

View on Amazon →

TOP PICK CORDLESS MULTI-TOOL

DEWALT DCS356C1 20V MAX XR Brushless Oscillating Multi-Tool Kit

Multi-Tools

DEWALT DCS356C1 20V MAX XR Brushless Oscillating Multi-Tool Kit

★★★★★ 4.5/5 · 4,520 owner reviews

The DCS356C1 is the cordless oscillating multi-tool most carpenters and remodelers should buy. The brushless motor delivers 0-20000 OPM with three speed settings, the universal accessory system fits Bosch, Fein, and Milwaukee blades alike, and the kit includes a 3 Ah battery, charger, bag, and starter accessory pack.

+Pros: Brushless motor delivers 0-20000 OPM across 3 selectable speed ranges · Universal QUICK-CHANGE accessory system fits any major-brand blade · Kit includes 3 Ah battery, charger, soft bag, and starter blades

−Cons: Universal blade interface adds slight thickness vs Fein StarLock proprietary · Trigger is recessed; cold-weather glove use is awkward

$199 $229

View on Amazon →

TOP PICK COMPACT RECIP

DEWALT DCS367B 20V MAX XR Brushless Compact Reciprocating Saw

Reciprocating Saws

DEWALT DCS367B 20V MAX XR Brushless Compact Reciprocating Saw

★★★★☆ 4.4/5 · 6,320 owner reviews

The DCS367B is the compact reciprocating saw most carpenters and finish-tradesmen on the DEWALT 20V MAX platform should own. It weighs 6.2 lb bare, fits in tight spaces a full-size Sawzall cannot reach, and the brushless motor delivers 2900 SPM under load. Sold bare; price assumes you already own 20V batteries.

+Pros: Compact 14.5-inch length fits between joists and inside cabinets · Light at 6.2 lb bare for one-handed use overhead and in tight bays · Brushless motor delivers 2900 SPM with linear power delivery

−Cons: Bare tool only; no battery, charger, or blades in the box · 1-1/8 inch stroke is shorter than the M18 2821; cuts heavy material slower

$159 $199

View on Amazon →

TOP PICK CORDLESS CIRCULAR SAW

DEWALT DCS570B 20V MAX 7-1/4 Inch Brushless Circular Saw

Circular Saws

DEWALT DCS570B 20V MAX 7-1/4 Inch Brushless Circular Saw

★★★★★ 4.5/5 · 8,740 owner reviews

The DCS570B is the cordless circular saw most pros on DEWALT 20V MAX should buy. The 7-1/4 inch blade gives full corded-saw cut depth (2-9/16 inches at 90 degrees), the brushless motor handles repetitive crosscuts without bog-down, and the saw runs on standard 20V MAX batteries. Sold bare; pricing assumes you already own platform batteries.

+Pros: 7-1/4 inch blade gives 2-9/16 inch depth at 90 degrees, equal to corded saws · Brushless motor delivers 5800 RPM under load with no measurable bog · Magnesium shoe stays flat after a season of jobsite drops

−Cons: Bare tool only; no battery, charger, or blade in the box · Heavy at 8.8 lb with a 5 Ah pack; tiring for overhead work

$169 $199

View on Amazon →

TOP PICK CORDED GRINDER

DEWALT DWE402 4-1/2 Inch 11-Amp Paddle Switch Angle Grinder

Angle Grinders

DEWALT DWE402 4-1/2 Inch 11-Amp Paddle Switch Angle Grinder

★★★★★ 4.5/5 · 13,420 owner reviews

The DWE402 is the corded angle grinder most metalworkers, fabricators, and remodelers should buy. The 11-amp motor delivers 11000 RPM with consistent power under load, the paddle switch with lock-off is the safer modern grip pattern, and the keyless wheel guard adjusts in seconds. Build quality is rugged enough to survive long-term abuse.

+Pros: 11-amp motor produces consistent 11000 RPM under cutting load · Paddle switch with lock-off is safer than thumb switches · Tool-free keyless guard adjusts in seconds without a wrench

−Cons: Corded; you must drag a power cord around for jobsite use · Heavy at 5.7 lb without battery considerations; tiring overhead

$89 $109

View on Amazon →

RECOMMENDED JOBSITE SANDER

DEWALT DWE6423K 3-Amp 5-Inch Random Orbit Sander Kit

Sanders

DEWALT DWE6423K 3-Amp 5-Inch Random Orbit Sander Kit

★★★★☆ 4.4/5 · 9,560 owner reviews

The DWE6423K is the random orbit sander to buy if you want a tool that survives jobsite drops, dust, and rough handling. The 3-amp motor delivers 8000-12000 OPM with variable speed, the rubber overmold makes one-hand sanding comfortable, and the dust bag system handles finish sanding cleanly. Slightly less refined than the Bosch ROS20VSC but more rugged.

+Pros: Variable speed 8000-12000 OPM with dial control · Rubber overmold body is grippy and survives jobsite drops · Counterweight motor design produces lower vibration than older DEWALT sanders

−Cons: Corded; cord can tangle on the workpiece during heavy sanding · Dust bag fills faster than canister-style competitors

$79 $99

View on Amazon →

EDITOR'S CHOICE COMPACT ROUTER

DEWALT DWP611PK 1.25-HP Variable-Speed Compact Router Combo Kit

Routers

DEWALT DWP611PK 1.25-HP Variable-Speed Compact Router Combo Kit

★★★★★ 4.6/5 · 8,420 owner reviews

The DWP611PK is the compact router combo kit most cabinet builders and serious woodworkers should own. The 1.25-HP variable-speed motor delivers 16000-27000 RPM, both fixed and plunge bases are included with the kit, dual LEDs illuminate the bit, and the soft-start motor reduces kickback. The kit also includes both bases, dust port adapters, a parallel guide, and a soft case.

+Pros: Soft-start variable-speed motor 16000-27000 RPM with electronic feedback · Both fixed and plunge bases included; quick-release base swap · Dual LEDs illuminate the cutting area clearly

−Cons: Corded; cord can tangle on workpieces during edge profiling · Plunge base spring is stiff; required to be broken in over first weeks

$199 $249

View on Amazon →

TOP PICK PRO CORDED

Fein MultiMaster MM 700 Max Top Corded Oscillating Multi-Tool

Multi-Tools

Fein MultiMaster MM 700 Max Top Corded Oscillating Multi-Tool

★★★★★ 4.7/5 · 1,520 owner reviews

The Fein MultiMaster MM 700 Max is the original oscillating multi-tool, refined to a level cordless competitors have not yet reached. The 450W motor delivers 10000-19500 OPM with the smoothest vibration profile in the class, the StarLock Max accessory system grips blades like no other interface, and the build is engineered for daily 8-hour duty cycle. Expensive at $449; for shop use it is the right tool.

+Pros: Smoothest vibration of any oscillating multi-tool in the class · StarLock Max grips blades firmly with no slip under heavy load · Engineered for 8-hour daily use; bearings still feel new at 24 months

−Cons: Expensive at $449; twice the cordless DEWALT DCS356 · Corded; cord can tangle on workpiece during detail cuts

$449 $499

View on Amazon →

TOP PICK PRO SANDER

Festool ETS 125 REQ 5-Inch Random Orbit Sander

Sanders

Festool ETS 125 REQ 5-Inch Random Orbit Sander

★★★★★ 4.7/5 · 1,240 owner reviews

The Festool ETS 125 REQ is the random orbit sander professional cabinet shops should buy. The brushless motor delivers 6000-12000 OPM with the smoothest vibration profile in the 5-inch class, the integrated vac port pairs with a Festool dust extractor for nearly complete dust capture, and the build is engineered for daily 8-hour use. The price is high; the productivity gain is real for high-volume shops.

+Pros: Lowest vibration of any 5-inch random orbit sander we have tested · Vac integration with Festool dust extractor captures nearly all dust · Brushless motor stays cool and quiet under sustained use

−Cons: Expensive at $285; three times the price of the Bosch ROS20VSC · Optimal performance requires a Festool vac (additional $400+)

$285 $299

View on Amazon →

RECOMMENDED LXT IMPACT

Makita XDT16Z 18V LXT Brushless Quick-Shift Mode 4-Speed Impact Driver

Impact Drivers

Makita XDT16Z 18V LXT Brushless Quick-Shift Mode 4-Speed Impact Driver

★★★★★ 4.5/5 · 5,320 owner reviews

The Makita XDT16Z is the LXT-platform impact driver to buy in 2026. The brushless motor delivers 1600 in-lb of torque, the 4-speed Quick-Shift selector includes a T-mode for self-tapping screws and an A-mode for assisted starts that prevents cam-out, and the build is the most refined of the four major brands. Sold bare; pricing assumes you already own LXT batteries.

+Pros: 1600 in-lb brushless impact with consistent torque across battery state · Quick-Shift Mode reduces drive speed when fastener seats to prevent cam-out · T-mode and A-mode are genuinely useful for self-tapping and small fasteners

−Cons: Bare tool only; the kit version (XDT16R) is a better starting point for new buyers · Loud at 100 dB measured under load; ear protection required

$129 $159

View on Amazon →

RECOMMENDED LXT DRILL

Makita XPH14Z 18V LXT Brushless 1/2-Inch Hammer Driver-Drill

Cordless Drills

Makita XPH14Z 18V LXT Brushless 1/2-Inch Hammer Driver-Drill

★★★★★ 4.5/5 · 3,210 owner reviews

The Makita XPH14Z is the LXT-platform hammer drill most homeowners and remodelers should buy. The brushless motor delivers 1090 in-lb of torque, the 2-speed gearbox shifts smoothly, and the tool runs noticeably quieter than the DEWALT or Milwaukee equivalents. Sold bare, so this assumes you have LXT batteries already on hand.

+Pros: Brushless motor produces 1090 in-lb of torque with low operating noise · 2-speed all-metal gearbox shifts cleanly under load · Compact 7.0-inch length fits most stud bays for shelf and cabinet work

−Cons: Bare tool only; no battery, charger, or case in the box · Belt clip mounts only on one side, not switchable

$159 $189

View on Amazon →

TOP PICK PRO CORDLESS

Milwaukee 2732-20 M18 FUEL 7-1/4 Inch Circular Saw

Circular Saws

Milwaukee 2732-20 M18 FUEL 7-1/4 Inch Circular Saw

★★★★★ 4.6/5 · 5,120 owner reviews

The Milwaukee 2732-20 is the cordless circular saw working pros should buy if they own the M18 platform. The POWERSTATE brushless motor delivers corded-equivalent power, the 5800 RPM no-load speed holds steady under sustained framing load, and the magnesium shoe stays flat through hard jobsite use. Sold bare; price assumes you already own M18 batteries.

+Pros: POWERSTATE brushless motor matches corded power on framing cuts · Holds 5800 RPM under load on 2x lumber with HD12.0 battery · Magnesium shoe maintains flatness across rough jobsite use

−Cons: Bare tool only, no battery, charger, or blade in the box · Heavy at 8.5 lb bare; tiring for sustained overhead use

$229 $279

View on Amazon →

TOP PICK PRO DRILL

Milwaukee 2804-20 M18 FUEL 1/2-Inch Hammer Drill/Driver

Cordless Drills

Milwaukee 2804-20 M18 FUEL 1/2-Inch Hammer Drill/Driver

★★★★★ 4.7/5 · 4,920 owner reviews

The Milwaukee 2804-20 is the M18 drill working contractors should buy. The POWERSTATE brushless motor pushes 1200 in-lb of fastening torque, the 4-mode REDLINK Plus clutch protects threads when driving small fasteners, and the all-metal gearbox has held up to a season of professional use without slop. Sold bare; the price assumes you already own M18 batteries.

+Pros: POWERSTATE brushless motor delivers 1200 in-lb of fastening torque · Four-mode REDLINK Plus electronic clutch protects fine threads · All-metal 1/2-inch ratcheting chuck holds bits without slip

−Cons: Heavier at 4.0 lb bare than the compact 2903-20 alternative · Bare tool only, no battery, charger, or case included

$229 $279

View on Amazon →

EDITOR'S CHOICE RECIP SAW

Milwaukee 2821-20 M18 FUEL Sawzall Reciprocating Saw

Reciprocating Saws

Milwaukee 2821-20 M18 FUEL Sawzall Reciprocating Saw

★★★★★ 4.6/5 · 4,280 owner reviews

The 2821-20 is the cordless Sawzall most working pros should buy. The POWERSTATE brushless motor delivers 3000 SPM, the 1-1/4 inch stroke is among the longest in the class, and the FIXTEC blade clamp grips blades tight without a tool. M18 ecosystem support and a 5-year warranty make this the long-term pick for demolition and rescue work.

+Pros: 1-1/4 inch stroke length cuts wood and metal faster than 1-1/8 inch competitors · POWERSTATE brushless motor holds 3000 SPM under sustained load · FIXTEC blade clamp swaps blades in seconds with no wrench

−Cons: Bare tool only; no battery, charger, or blades in the box · Heavy at 8.7 lb with an HD12.0 battery; tiring overhead

$229 $269

View on Amazon →

TOP PICK QUIET DRIVER

Milwaukee 2853-20 M18 FUEL Surge Hydraulic Impact Driver

Impact Drivers

Milwaukee 2853-20 M18 FUEL Surge Hydraulic Impact Driver

★★★★★ 4.6/5 · 6,850 owner reviews

The Milwaukee 2853-20 Surge uses a hydraulic impact mechanism instead of a mechanical hammer, which drops noise to 85 dB at the operator ear vs the 102 dB of standard impact drivers. Torque is rated at 450 ft-lb, the 4-mode RPM selector covers most fastener sizes, and the M18 ecosystem is the broadest in the pro segment. Sold bare; pricing assumes you already own M18 batteries.

+Pros: Hydraulic impact runs quieter than any mechanical impact driver in the field · Four-speed RPM selector with self-tapping screw mode prevents over-driving · REDLINK Plus electronics give consistent torque control across battery state

−Cons: Bare tool only, costs $80 more than the standard DEWALT DCF887B · Hydraulic mechanism slightly slower than mechanical impact under heavy lag-screw load

$199 $249

View on Amazon →

BEST BUDGET DRILL KIT

Ryobi P1813 18V One+ HP Brushless 1/2-Inch Drill/Driver Kit

Cordless Drills

Ryobi P1813 18V One+ HP Brushless 1/2-Inch Drill/Driver Kit

★★★★☆ 4.3/5 · 5,640 owner reviews

The Ryobi P1813 is the best-value full kit a homeowner can buy in 2026. The brushless motor produces 750 in-lb of torque, the kit includes two 4 Ah batteries and a charger, and the One+ platform supports more than 300 tools. It will not match Milwaukee or DEWALT pro drills under sustained load, but for weekend projects the value is hard to argue with.

+Pros: Full kit includes two HP 4 Ah batteries plus charger and bag · Brushless motor delivers 750 in-lb at a sub-$200 kit price · Compatible with the entire One+ ecosystem (300+ tools)

−Cons: Heavier and longer than DEWALT and Milwaukee compact drills · Plastic gearbox housing flexes slightly under high-torque loads

$179 $199

View on Amazon →

BEST BUDGET CORDLESS BRAD NAILER

Ryobi P325 18V One+ AirStrike 18-Gauge Cordless Brad Nailer

Nailers

Ryobi P325 18V One+ AirStrike 18-Gauge Cordless Brad Nailer

★★★★☆ 4.3/5 · 7,820 owner reviews

The Ryobi P325 is the cordless 18-gauge brad nailer to buy if you already own One+ batteries and need a trim nailer for occasional or homeowner-level work. The AirStrike system fires nails without a hose or compressor, the dual LED illuminates the nose, and the depth adjustment is positive. It is heavier and slower than DEWALT or Milwaukee competitors, but the value is hard to argue with.

+Pros: AirStrike technology eliminates hose and compressor for cordless trim work · Dual LEDs illuminate the nose for accurate placement on dark trim · Tool-free depth-of-drive adjustment is positive and repeatable

−Cons: Heavier at 6.2 lb than DEWALT or Milwaukee 18-gauge nailers · Sequential mode only; no bump-fire mode for production trim work

$149 $179

View on Amazon →

TOP PICK CORDED WORM DRIVE

Skilsaw SPT77WML-01 15-Amp 7-1/4 Inch Magnesium Worm Drive Saw

Circular Saws

Skilsaw SPT77WML-01 15-Amp 7-1/4 Inch Magnesium Worm Drive Saw

★★★★★ 4.7/5 · 4,310 owner reviews

The Skilsaw SPT77WML-01 is the framing saw American carpenters have used for 60-plus years, refined into a magnesium-housed modern tool that weighs 14 pounds instead of the cast-iron 18 of the original. The 15-amp motor produces unstoppable framing power, the 4.7-pound magnesium gear case keeps weight reasonable, and the saw will outlast most cordless platforms by a decade.

+Pros: 15-amp motor handles continuous framing without thermal limit · Magnesium gear case drops weight to 14 lb from 18 lb cast iron · Worm drive geometry handles wet pressure-treated lumber with no slowdown

−Cons: Corded; you must drag an extension cord across the jobsite · Heavier than sidewinder saws at 14 lb; tiring for overhead use

$189 $219

View on Amazon →