Yes4All Cast Iron Kettlebell 35 lb Review (2026): 11 Months

Why you should trust this review

I bought this specific 35 pound bell with my own money and trained with it for nearly a year, with no involvement from Yes4All. Eleven months of regular use on a real training floor is the only honest way to judge whether a budget bell holds up, so these notes come from ownership, not a showroom handle.

The 35 pound weight is a workhorse load for swings, goblet squats, and presses, so this bell saw a lot of volume. That volume is what exposes a budget bells weaknesses, from flaking paint to a handle that betrays your grip when sweaty.

I own competition bells as well, which gives me a clear reference for what this cheaper bell does and does not match.

How we evaluated

I verified the weight on a calibrated scale, then trained with the bell for eleven months while logging how the paint, balance, and handle held up. I also ran controlled drops onto rubber matting to check the casting for cracks, since dropping a kettlebell is an inevitability over time.

I paid attention to the handle diameter and finish during sweaty sessions, noting exactly when and where the gloss paint started to flake and how slick the grip became under sweat. I compared the feel against pricier bells throughout.

Weight accuracy and casting

The bell measured 34.4 pounds on a calibrated scale, just under the nominal 35, which is a perfectly acceptable tolerance for training. Close enough that it changes nothing about programming, and reassuring that the casting is honest.

The single piece pour also means the casting is solid, with no welded handle to fail. Through eleven months the structural integrity never came into question, which is the most important thing for a bell you swing overhead.

Accurate weight and a one piece body are the fundamentals, and this bell gets both right.

Drop durability

I subjected the bell to six controlled drops onto rubber matting, and it came through with zero cracking. Cast iron can chip or crack on a bad drop, especially budget castings, so seeing it survive cleanly is a good sign for real world durability.

On matting, which is how any sensible home gym is set up, the bell shrugged off the impacts. I would still avoid dropping any kettlebell on bare concrete, but onto proper flooring this one is tough.

That resilience is what lets you train without babying the bell, which is half the point of cast iron.

Handle diameter and grip

The 1.4 inch handle diameter is a comfortable middle ground that fit across small to large hands in my testing. It is thick enough to build grip without being so thick it tears at your real-world high rep sets.

The 5 inch window between the horns is workable for most movements, though like many budget bells it is a little tighter than a dedicated competition handle for two hand swings.

For single hand work, cleans, and presses the handle felt natural, and the diameter is one of the bells genuine strengths.

Paint flaking and sweat

Here is the honest weakness. The gloss enamel paint on the handle contact zone began flaking within about thirty sessions. It is cosmetic and does not affect function, but the chipped look appears quickly and is worth knowing.

Worse than the looks is that the gloss finish gets slick when your hands sweat. Unlike a matte powder coat, the enamel offers less bite under sweat, so chalk becomes more or less mandatory for heavy or high rep work.

If a grippy, low maintenance handle is a priority, the gloss enamel here is the bells main shortcoming.

Value against premium bells

The value case is straightforward. This bell costs less than half what a premium competition style bell does and covers the same core training function, which is exactly what most home gyms need.

You give up the refined matte handle and the cosmetic durability of the expensive bells, but you keep the accurate weight, the solid casting, and the drop resistance that actually matter for training.

For a budget conscious lifter who wants real iron and does not mind chalk, the savings are substantial and the compromises are livable.

Who should buy the Yes4All 35 lb kettlebell?

Buy it if you want an affordable, accurately weighted, durable 35 pound bell for a home gym and you are comfortable using chalk on a glossier handle. It does the core job for far less than premium bells.

Skip it if you want a grippy matte powder coat handle that resists sweat with no chalk, or if flaking paint will bother you cosmetically. Those buyers should spend up for a competition style bell.

The verdict

After eleven months the Yes4All 35 pound kettlebell has proven a tough, honest, budget friendly bell where it counts, with accurate weight and casting that survived real drops. For the price, the fundamentals are all there.

The flaking enamel and slick sweaty grip are the real compromises, both solvable with chalk and a tolerance for cosmetic wear. Neither stopped me from training hard with it for nearly a year.

For a cheap, dependable training bell, it earns its place in a home gym, which is all most lifters are asking of it.