Yes4All Cast Iron Kettlebell Review (2026): 7 Months on a Garage Floor

Why you should trust this review

I am a USAW Level 1 and CSCS certified strength coach with 16 years of programming experience. I have spent 5 years on the home-gym beat at Garage Gym Reviews (2020 to 2025) and have personally tested 14 different kettlebells across price tiers. I purchased this Yes4All 35 lb kettlebell at retail in October 2025 specifically as a budget benchmark against my long-term Rogue Kettlebell and Kettlebell Kings powder coat. Yes4All did not provide a sample.

For this review the Yes4All went through 180 logged sessions, mostly two-hand swings, goblet squats, presses and Turkish get-ups. All measurements follow our methodology page protocol.

How we tested the Yes4All Kettlebell

Our kettlebell protocol takes 90 days minimum. The Yes4All cleared 180 sessions plus the bench tests:

• Weight accuracy: Calibrated digital scale, three trials averaged.
• Handle finish: Caliper measurement of handle diameter and width, plus subjective grading across 8 sessions of two-hand swings.
• Powder coat durability: Daily use on concrete and rubber surfaces, monthly photographs, drop tests onto rubber matting.
• Balance: Center-of-gravity check by hanging the bell from a hook and recording the swing axis.
• Comparison sessions: 6 paired sessions where I alternated between the Yes4All and a Rogue 35 lb bell on identical movements.
• Casting inspection: Visual and tactile check of seams, cast lines and any voids.

Who should buy the Yes4All Kettlebell?

This is the right kettlebell for you if:

• You are building a home gym and want real cast iron at the lowest reasonable price.
• You train 1 to 2 sessions a week with kettlebells, the handle finish is fully sufficient.
• You want to test multiple weights cheaply before committing to premium bells.
• You are a beginner and the rougher handle is unlikely to limit you.

Skip it if:

• You compete in GS or hardstyle kettlebell sport, competition-spec bells are required.
• You train 3+ sessions a week with kettlebells, the Kettlebell Kings powder coat is worth the upgrade.
• You have very large hands, the 5.5-inch handle window is tight for two-hand grips.
• You drop bells frequently on bare concrete, the powder coat will chip eventually.

Weight accuracy: better than expected

On the calibrated digital scale, my 35 lb Yes4All measured 35.4 lb, a 1.1% overage. Yes4All states a 2% tolerance and most owners report similar small overages rather than underages, which is what you want from a kettlebell. By comparison, my Rogue 35 lb measured 35.05 lb (essentially perfect) and a generic CAP vinyl bell measured 36.8 lb (5.1% overage).

For training purposes, anything within 3% of stated is fine. The Yes4All clears that threshold by a comfortable margin.

Handle finish: the legitimate trade-off

The 1.4-inch handle diameter on the 35 lb is a useful all-around size, neither too thick for hand-fatigue snatch work nor too thin for grip development. The casting seam runs along the underside of the handle, which is the standard location, and on my unit it was raised about 0.5mm above the surrounding finish. After 180 sessions and one pre-use sanding with 200-grit sandpaper, the seam is fully smooth and the handle feels comparable to mid-tier powder coat.

The overall handle texture is rougher than the smoother e-coat on a Rogue. For users new to kettlebells this is genuinely useful, the rougher surface holds chalk better and reduces slip on heavy swings. For experienced lifters who want a smoother grip for high-rep cycling, the texture is more aggressive than ideal.

Casting and balance: solid where it counts

Hung from a hook, my Yes4All swings on a clean axis with no perceptible wobble. The bell feels balanced, the typical sign of a flawed casting (the bell hanging slightly off-axis or feeling lumpy in motion) is absent. Visual inspection shows no voids, no surface bubbles and no signs of a poor pour.

The base diameter is 5 inches, slightly smaller than the Rogue’s 5.25-inch base. In practice this means the Yes4All sits slightly less stable on uneven surfaces, but on any normal gym floor it is a non-issue.

Powder coat durability: surprisingly robust

After 180 sessions on a mix of concrete and rubber surfaces, the powder coat shows minor abrasion at the bottom of the bell where it lands repeatedly, but no chipping, no flaking and no rust at any point. I deliberately dropped the bell onto 3/8-inch rubber matting from chest height twice during testing. Both drops left no visible damage.

The powder coat is the part of the bell I expected to fail soonest at this price. It has not. Owner reviews above 24 months mention occasional chipping at heavy-drop contact points, but that is universal across powder-coated bells.

Where the budget cap shows

Two real differences from premium bells. First, the casting seam on the underside of the handle is functional but not refined. On my 35 lb it was raised slightly enough that I sanded it before first use. After sanding, the handle is comparable to mid-tier bells. Second, the powder coat is rougher than the smoother e-coat on a Rogue, which affects callus development and high-rep cycling work.

For heavy users running 3+ sessions a week, the upgrade to the Kettlebell Kings powder coat at $75 buys a noticeably smoother handle and a more refined casting. For everyone else, the Yes4All is the right tool at the right price.

Yes4All Cast Iron Kettlebell vs. the competition

Full specifications

See full details on Amazon →

Frequently asked questions