Mounting a TV on a concrete or masonry wall requires anchors built for the job. Standard drywall anchors will not hold — concrete demands fasteners with mechanical expansion or chemical bonding to carry the combined weight of a large screen and mount. The five picks below cover different anchor types, load needs, and wall materials so you can choose the right solution for your install.
| Product | Best For | Rating |
|---|---|---|
| ITW Red Head Trubolt Wedge Anchor | Heavy mounts, solid concrete | 4.7/5 |
| Hilti HIT-Z Zinc Anchor | High-load applications | 4.8/5 |
| Simpson Strong-Tie Sleeve Anchor | General masonry, easy install | 4.6/5 |
| Powers Fasteners Toggle Bolt | Hollow block walls | 4.4/5 |
| Toggler SnapSkru Self-Drill Anchor | Light-duty, thin masonry | 4.3/5 |
ITW Red Head Trubolt Wedge Anchor — Best for Solid Concrete
The ITW Red Head Trubolt is a stainless steel wedge anchor designed for high-load applications in solid concrete. When driven into a pre-drilled hole, the clip expands against the hole wall and locks the anchor in place with significant pull-out resistance. These are a go-to choice for contractors installing heavy flat panel mounts on poured concrete walls. They come in a range of diameters and lengths, making it straightforward to match the anchor spec to your mount’s hardware requirements. Installation requires a hammer drill and the correct masonry bit, but the install process itself is fast once the hole is drilled. For TV mounts, the 3/8-inch by 3-inch version covers most residential setups.
Search for ITW Red Head Trubolt Wedge Anchor on Amazon
Hilti HIT-Z Zinc Anchor — Best for High-Load Applications
Hilti’s HIT-Z anchor is a mechanical zinc alloy option often used in commercial and demanding residential installs. The torque-controlled expansion provides a predictable, reliable set with good load ratings in solid and cracked concrete. Hilti is known in the trade for tight manufacturing tolerances, which translates to consistent performance across anchors in the same box. These are pricier per unit than generic alternatives but are a solid choice when you want minimal variability in a structural application like a large TV or projector mount. Available in multiple sizes through specialty fastener suppliers as well as Amazon.
Search for Hilti HIT-Z Zinc Anchor on Amazon
Simpson Strong-Tie Sleeve Anchor — Best for General Masonry
Simpson Strong-Tie sleeve anchors work in concrete, brick, block, and stone, making them one of the most versatile options for masonry TV installs. The sleeve expands radially when the bolt is tightened, gripping the interior of the drilled hole without relying on a specific concrete density. They come in hex head and flat head configurations — hex head is easier to tighten with a socket wrench during mount installation. Simpson Strong-Tie has a well-established reputation for load testing and quality control, and their sleeve anchors are stocked at most hardware stores for easy local sourcing. A solid all-around pick for any masonry substrate.
Search for Simpson Strong-Tie Sleeve Anchor on Amazon
Powers Fasteners Toggle Bolt — Best for Hollow Block Walls
If your wall is concrete masonry unit (CMU) block with hollow cavities, standard expansion anchors are not suitable — they need solid material behind them. Powers Fasteners toggle bolts are designed for hollow-core masonry. The spring-loaded wings open behind the cavity wall and spread the load across a larger bearing area. They require a larger drill hole than expansion anchors, but once set, they perform well for TV mounts in the 50-inch and under range. Check the weight rating on the specific bolt size before purchasing; hollow block does not carry load the same way solid poured concrete does.
Search for Powers Fasteners Toggle Bolt Masonry on Amazon
Toggler SnapSkru Self-Drill Anchor — Best for Light-Duty Installs
For smaller TVs on thinner masonry surfaces or in situations where you cannot use a hammer drill, Toggler SnapSkru anchors offer a drill-free installation method. They thread directly into pre-drilled or self-drilled pilot holes in softer masonry materials. Load ratings are lower than wedge or sleeve anchors, so these are best suited for screens under 40 inches or supplemental bracket points. They are fast to install and widely available. If your wall is standard brick or lightweight block and the TV is modest in size, these are a practical low-effort option worth considering.
Search for Toggler SnapSkru Self-Drill Anchor on Amazon
How to Choose Concrete Anchors for TV Mount
Start by identifying your wall type: solid poured concrete, concrete masonry unit block, or brick. Each requires a different anchor strategy. Next, check your TV mount’s spec sheet for the required bolt diameter, length, and minimum pull-out strength. Heavier mounts and larger screens demand anchors with higher load ratings — budget for quality here since failure is not an acceptable outcome. Confirm you have a hammer drill and the correct masonry bit size before purchasing anchors. Stainless steel or zinc-plated anchors resist corrosion better than bare steel, which matters in basements or exterior walls with moisture exposure. Buy a few extra anchors in case a hole needs to be repositioned.
For related reading, check out best TV wall mounts for concrete walls and best masonry drill bits. See how we evaluate fastening hardware at /methodology.
Frequently asked questions
What size concrete anchor do I need for a TV mount?+
Most standard TV mounts use 3/8-inch or 1/2-inch anchors. Check your mount's hardware spec sheet first -- it will list the required bolt diameter and minimum embedment depth. For TVs over 55 inches or heavier mounts, use sleeve anchors or wedge anchors rated for at least 200 lbs each to stay well within safe load limits.
Do I need special drill bits to install concrete anchors for a TV mount?+
Yes. You need a hammer drill and carbide-tipped masonry bits sized to match your anchor diameter. Standard twist bits will not penetrate concrete effectively and will burn out quickly. A rotary hammer drill is preferable for dense concrete or thick masonry block walls, as it delivers more impact energy per rotation for cleaner, straighter holes.