Crash bars are one of the highest-value investments you can make on a Honda Africa Twin used for off-road or adventure touring. A single low-speed tip-over on gravel or a trail can crack an engine case, dent an exhaust header, or shatter a lower fairing panel. repairs that cost far more than any set of guards. The five picks below cover the Africa Twin CRF1100L and CRF1000L, selected for protection coverage, fitment quality, and real-world use reports from adventure touring communities.
| Product | Est. Price | Best For | Rating |
|---|---|---|---|
| Touratech Crash Bars | ~$380 | Full frame + engine coverage | 4.8/5 |
| SW-Motech Engine Guard | ~$220 | Budget-conscious touring | 4.6/5 |
| Outback Motortek Upper + Lower | ~$310 | Dual-layer protection | 4.7/5 |
| Givi TN Engine Guard | ~$190 | Entry-level street/gravel use | 4.4/5 |
| Heed Engine Guard | ~$160 | Budget install option | 4.2/5 |
Touratech Crash Bars - Best Africa Twin Crash Bar Overall
Touratech’s crash bars for the Africa Twin set the standard for adventure touring protection. The stainless steel tubular construction wraps the engine and lower frame with coverage extending to the exhaust headers. The mounting system uses the factory frame points with reinforced brackets rather than relying on single-bolt attachment, which matters when the bike takes a hard fall on a slope. These bars are heavier than budget alternatives but hold their shape after repeated tip-overs rather than bending onto the engine. Compatible with Touratech’s own side cases and pannier systems.
Search for Touratech Africa Twin Crash Bars on Amazon
SW-Motech Engine Guard - Best Mid-Range Africa Twin Crash Bar
SW-Motech makes consistently reliable engine guards for adventure bikes and their Africa Twin-specific fitment reflects that. The steel guard covers the lower engine casings and sits close to the frame without excessive outward protrusion. Installation is straightforward with supplied hardware and torque specs. The protective coverage is slightly less than Touratech’s full-wrap design, but for riders who spend more time on tarmac and gravel roads than technical single-track, it’s more than adequate. Price is significantly lower and the fitment quality is precise.
Search for SW-Motech Africa Twin Engine Guard on Amazon
Outback Motortek Upper and Lower Set - Best Dual-Layer Protection
Outback Motortek’s combined upper and lower crash bar system gives the Africa Twin the most comprehensive protection in this roundup. The upper bars protect the headlight nacelle and instrument cluster area during forward tips, while the lower engine guards cover the casings and headers. The system is designed to work together structurally so both sections reinforce each other during an impact. It’s a heavier and more expensive install but the coverage is noticeably more complete than single-piece guards. Popular with riders doing extended off-road touring in remote areas where a damaged instrument cluster could end a trip.
Search for Outback Motortek Africa Twin crash bars on Amazon
Givi TN Engine Guard - Best Entry-Level Africa Twin Guard
Givi’s TN-series engine guard is the go-to recommendation for riders who want basic protection without the cost of premium European brands. The steel tubular construction covers the main engine cases adequately for street riding, light gravel, and occasional low-speed drops. Fitment is clean and installation uses accessible mounting points. For an Africa Twin that spends 80% of its time on paved roads with occasional dirt detours, the Givi TN gives meaningful protection at a price that doesn’t hurt. Not recommended for sustained technical off-road use where more substantial guards are worth the extra cost.
Search for Givi TN Africa Twin engine guard on Amazon
Heed Engine Guard - Best Budget Africa Twin Crash Bar
Heed makes Africa Twin-specific engine guards at the lowest price point in the category with acceptable fitment quality. The steel construction is thinner than premium alternatives and the mounting hardware is basic, but for riders on a tight budget who want some protection over none, it’s a credible option. Reports from owners suggest these guards handle low-speed parking lot drops and slow trail falls without failing, though they show deformation at higher-impact angles that premium guards would absorb better. Install time is under two hours with basic tools.
Search for Heed Africa Twin engine guard on Amazon
What to Look For in Africa Twin Crash Bars
Coverage area matters most: a guard that only protects the oil filter is less useful than one that wraps the lower casings and headers. Check whether the guard maintains clearance from the exhaust under load, as inadequate clearance causes heat discoloration and rattling. Steel outperforms aluminum for repeated impact resistance, though aluminum guards are lighter. Verify model-year compatibility explicitly. CRF1100L and CRF1000L mounting points differ. Bolt-on systems using factory frame holes are more reliable than guards that clamp to existing bolts.
Final Thoughts
For Africa Twin riders who use their bike beyond tarmac, crash bars are not optional equipment. The Touratech set is the best all-around choice for serious off-road touring. The SW-Motech guard is the smart mid-range pick for mixed use, and the Heed guard covers the basics for budget-conscious buyers. Match your choice to how aggressively you actually ride and what terrain you cover most often.
Frequently asked questions
Do crash bars affect the Africa Twin's ground clearance?+
Well-designed crash bars for the Africa Twin add minimal bulk below the engine skid plate line. Quality tubular steel guards typically sit within the existing frame width envelope, so ground clearance impact is negligible. The main concern is side protrusion: wider guards give more tip-over protection but can catch on rocks during tight technical sections on single-track trails.
Are crash bars compatible with both CRF1000L and CRF1100L models?+
Not always. The CRF1100L Africa Twin introduced in 2020 has different frame dimensions and engine mounting points than the older CRF1000L. Always verify fitment by model year before purchasing. Most reputable brands like Touratech and SW-Motech list specific compatibility by year and variant, including DCT and standard transmission versions, so check the fitment chart carefully.
Can I install Africa Twin crash bars myself?+
Most Africa Twin crash bars are bolt-on installations requiring basic hand tools. typically 8mm, 10mm, and 12mm sockets plus threadlocker. Installation takes one to three hours for someone with moderate mechanical confidence. Follow the torque specifications in the instructions because undertightened bolts on frame guards work loose under vibration. Some guards require removing the lower fairings first to access mounting points.